The Smartest DIY Home Improvements

Q: How often does TED update the data?
A: TED updates its data every second!

Q: Are there batteries to change?
A: No. TED will never have to have batteries changed. It is truly maintenance-free. (And TED only costs about $0.08 per month to operate!)

Q: How accurate is TED?
A: TED is calibrated to be accurate to within 2%! (But you will likely find it to be closer to 1%)

Q: How sensitive is TED?
A: TED is sensitive to 10 WATTS. If you turn on a 10-watt bulb, TED will know (and immediately show) that you turned on a 10-watt bulb! You will find those "phantom" loads!

Q: Do I need to reset TED each month?
A: No...TED is fully-automatic. Once set up, TED will perform all functions automatically!

Q: Can I use TED to measure individual circuits?
A: Yes....although TED is designed to measure your entire home, you can easily measure individual circuits simply by clipping the thumb-squeeze CTs over the circuit you wish to monitor.

Q: Does TED measure true power?
A: Yes, TED measures true RMS power; TED does take into account Power Factor.

Q: Can TED control appliances in my home?
A: TED is being designed to perform automatic load-shedding functions.

Q: Can I use TED to monitor a 'mother-in-law' apartment?
A: You certainly can. Simply clip the thumb-squeeze CTs over the supply to the apartment.

Q: Will I lose data if I unplug TED or if the power goes off?
A: No. TED stores data in non-volatile memory. You will never lose data. However, if you do unplug TED, any power being used will not be recorded.

Q: I have a Photovoltaic System and I send power back to the grid. Does TED perform net metering?
A: No. TED1001 does not perform net metering. TED5000 will perform net metering.

Q: Will TED interfere with X-10 and other home automation systems?
A: TED has its own data transmission stream that should not interfere with any other home automation products.

Q: Will my Utility reduce my electricity rate if I install TED?
A: Having TED in your home may qualify you for a different tariff schedule. You will need to check with your local utility.

Q: Is TED more accurate than my utility meter?
A: If you feel that TED has presented a case of your meter being inaccurate, simply call your Utility. They will be happy to send someone out to confirm its accuracy. (TED is accurate to within 2%!!)

Q: What is involved in installing TED?
A: A qualified homeowner or an electrician can easily install TED in 10-15 minutes. TED operates on the existing wires in your home, so there is no need to run any additional wires.

Q: Is TED hard to program?
A: TED is only as difficult to setup as your electricity bill is to understand. Once the 'setup' routine has been completed, TED permanently stores all the data that has been entered, even in the event of a power outage. Unlike your VCR it only needs to be re-programmed if your electricity rates change.

Q: How does TED work?
A: TED's transmitting device, located in your circuit breaker panel, measures the amount of electricity coming into your home as you demand/use it, and transmits data every second over your receiving unit. The receiving display unit can be plugged into any A/C outlet in your home.

Q: How long will it take to get my money back from the purchase of TED?
A: In the home of a conscientious energy consumer, it could be as short as a few months. It would certainly depend on one's use of TED. So, how fast do you want the payback to be? Using the analogy of the 'bathroom scale', how fast do you want to lose weight? It depends on how conscientious you are.