 |
|
|
Shop > HomePro > ZWAVE-WIRED-MOTION-KIT
|
Homepro Z-Wave Wall Switch and Motion Detector Kit
|
|
|
|
 Enlarge Image
|
Convenient Z-Wave Starter Kit the includes one Motion Detector and one Wired Wall Switch.
This kit allows you to setup security lighting or occupancy lighting according to motion.
Note: To change the mode of this motion sensor, you will require the ZTH000 remote control. The motion sensor is set to Lighting Mode by default.
|
 |
|
Item # ZWAVE-WIRED-MOTION-KIT
|
|
 |
|
|
|
|
|
|
|
|
|
Motion Detector Features
The ZIR000 has three modes:
|
- Alarm mode
- Alarm mode allows the ZIR000 to be used in a Z-Wave enabled alarm system.
- Lighting Mode
- Lighting Mode allows the ZIR000 to turn on lights
when motion is sensed.
The amount of time the
lights remain on are user configured.
- Binary Sensor Mode
- Binary Sensor Mode allows ZIR000 to talk to
other devices in the network that accept a binary
Z-Wave signal.
|
|
Motion Detector Specifications
|
- Power Supply 6VDC (4 x 1.5V AAA alkaline battery)
- Battery life is Approximately 12 months
- Standby Current 58 microamps
- Alarm Current 28.7mA
- Coverage Range 110 Degrees and up to 39 feet (12 meters) in wide angle
|
Wall Switch Features
This Wall Mounted Dimmer Switch can be easily be
installed as a replacement for the current switch.
It can directly control the on/off of any connected
lighting or other electrical load. It can also be
controlled from a HomePro Wireless Remote Controller.
Pushing the top and bottom of the switch at the
same time identifies the Wall Mounted Switch
to the wireless Controller. Loads can then be
turned on and off, in groups, or individually from
the Wireless Controller.
Using the HomePro Wireless Controller, an "All
On" command can be broadcast for security
reasons, and with the "Timer" feature, loads controlled
by the Switch and other HomePro RF
modules can be scheduled to turn on and off at
pre-selected times.
Rated at 600 Watts
|
Wired Wall Switch Features:
|
- Provides ON/OFF, BRIGHT/DIM with wireless RF, or manually, of any light or
lamp connected.
- Replaces current wall switch.
- Each ZDW120 Wall Mounted Switch functions as an automatic repeater to
other HomePro Modules to ensure full home coverage of the RF signal.
APPLICATIONS
Safety and Security
|
- ALL ON/ALL OFF - With a Wireless Controller you can turn all controlled
lights on or off with the touch of one button in case you hear noises in the night.
- Burglar Deterrent - The Wireless Controller can be programmed to randomly turn HomePro Wireless modules
on or off at selected times throughout the house. Lights connected to Wall Mounted Switches (or outlets they
control), or other HomePro Wireless modules, simulate the appearance that someone is home.
- Child Protection programmed in the Wall Mounted Switch can lock it providing extra safety, if needed.
Comfort and Convenience
|
- The Wall Mounted Switch (or other Wireless modules) can be operated by your Wireless Controller to operate
lights regardless of whether you're in the kitchen, lying on the sofa or on your way out the door.
- Grouping activates several, or all wireless modules (and their connected lights), by the push of one button
on the Wireless Controller. No more wandering from lamp to lamp when you come home to turn on the lights,
or when you're on your way to bed.
- Scenes - HomePro RF Modules allow connected lighting to respond to Scene settings. The Wireless
Controller can be programmed to control different lighting loads. Then, with the push of a button, select "dinner
scene", "watch TV scene", "evening scene", or whatever lighting combination (and level, if using HomePro
Dimmers) you choose.
- The Timer feature of the Wireless Controller lets you set any HomePro RF Module (and connected lights) to
turn on at preset times.
|
|
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
