 |
|
|
|
Shop > RCS > TU16
|
|
|
|
|
Features
|
- Now with Dual Setpoints (separate Heat and Cool) and Multi-Stage
- Output Control
- Separate Heat and Cool Setpoints
- Bi-Directional UPB Control
- Two part design
- Set specific temperatures by X10 commands
- Set modes by UPB commands
- Backlit LCD Wall Display Unit
- For standard gas/electric or heat pump HVAC systems
- Replaces existing 4 or more wire thermostats without the need for additional wiring
|
UPB Interface - NOT INCLUDED - MUST BE ORDERED SEPARATELY
The TU16 interfaces to UPB through the TU16 TCU via UPB 2-way interface module and cable (not included).
|
|
|
|
|
|
|
TS16 Wall Display Unit (WDU)
The TS16 provides a typical thermostat user interface with display of the current temperature, Setpoint or mode on a two digit Backlit LCD display. It has pushbuttons for Setpoint down, Setpoint up, mode and fan control. The TS16 has a digital temperature sensor and changes in temperature are sent to the TU16 Thermostat Control Unit along with any push button commands. The TS16 WDU also has connections for an Outside Temperature sensor and up to 2 Remote Indoor averaging sensors.
TU16 Thermostat Control Unit (TCU)
The TU16 TCU maintains temperature control for the TU16 Thermostat. It receives updates from the TS16 WDU of temperature changes and pushbutton command inputs. The TU16 TCU also has a UPB interface that allows it to receive commands from a remote UPB source. The TU16 can send/receive UPB commands.
The TU16 HVAC Control Unit controls standard gas/electric, 2- stage heat, 2- stage cool, or heat pump systems with 3- stage heat, 2- stage cool HVAC systems. It connects to the HVAC system via standard thermostat connections. It is also adaptable to hydronic, radiant and other types of independent heating and/or cooling systems.
|
|
|
|
|
|
|
|
|
The Smartest DIY Home Improvements
